Side Panel Extension - Cooler Master NR200

Description

This side panel extension allows you to use much taller CPU coolers like the Noctua NH-D15 and the be quiet! Dark Rock Pro 4. In my initial testing I was able to barely fit a Noctua NH-D15 with my MSI B450 Gaming Plus AC motherboard. I'd estimate the maximum cooler height is 165mm. The side panel extension comes in 4 pieces which snap together and then are screwed into the side of the case through existing holes with 4 included M3 bolts. Once the side panel extension is screwed on, you attach your tempered glass or mesh panel just like you would previously.
There are three standard colors I am offering this side panel extension in, clear white, white, and black. The black and white colors match their respective cases quite nicely and don't allow much if any light to shine through them. The clear white color on the other hand let's RGB shine through if desired but also blends in nicely with either panel when not using RGB lighting.  In addition to those three colors, if you'd like a different color you may select the custom option from the color selection dropdown. Then specify the color you'd like in your message when placing the order and we'll get in touch with you if we have any questions. Please note that custom colors will require additional processing time because we'll have to order the filament and wait for it to be delivered.
Installation instructions: https://imgur.com/a/a6J3pPX
RGB demo video: https://www.youtube.com/watch?v=nnhdqZG62NEre
Good to know:
This product is printed using PETG which is a super strong and temperature resistant material. That being said, this side panel extension is long and thin and can snap apart if handled poorly. That being said, super glue can be used to fix almost anything on the side panel extension.
The tempered glass doesn't sit perfectly flush on the front and back of the side panel extension because the top and bottom of the panel have metal that is attached to them. If you look closely from the front or back you'll see a small gap where air/light can pass through. The mesh panel won't do this as much because it is flat unlike the glass panel where it connects to the case.
This is a 3d printed product and there are bound to be small imperfections here and there; however, I only accept high quality prints and throw away the rest. That being said, don't expect to hold the parts inches away and expect perfection.