NR200 Taller Feet Extended Height Riser with Shroud 3d Print

Description

Set of Feet for the NR200 Case
This is a set of feet to raise the NR200 and allow the use of the space under the case for radiators or fans.
The height measurements available correspond to the height of the shroud. The taller the shroud the more it can hide. Make sure you measure the thickness of what you intend to mount under the NR200 and purchase the corresponding set of feet to
ensure
fitment.
The feet have a "F" embossed on the front set so you know which is which. Also the rear set has an area cut out to allow cable management back into the case or out of the radiator! I have created screw holes to allow the stock bottom feet screws to be reused. C
omes with two strips of double sided tape to attach the sides of the shrouds to each other and keep them level.
If you have any suggestions on the design let me know!
3D printed and made to order!
Any questions feel free to ask!