NEW EATON C30CN LIGHTING CONTACTOR C30CNM60A02A0 - NEW IN BOX

Description

NEW ITEM IN BOX
The C30CNM 30 A mechanically held lighting contactors from EATON electrical sector are designed for industrial, commercial and outdoor lighting applications where efficient control is required. The mechanically held operation ensures that the contactor will not switch to off during control power failure. It also ensures the removal of coil from the circuit for noise-free operation and the elimination of all coil losses after the contactor is latched. The control module microprocessor validates he control signal before operation, so it will not respond to momentary voltage spikes of noise. The operation command has a built-in 0.4 s delay to avoid multiple short-term commands that can cause contact fatigue or failure. Also, the feedback loop prevents the contactor from getting out of sequence with switches, even after power failures.
EATON Lighting Contactor, 2-Wire Type C30CN Mechanically Held, Series: C30, 110/115/120 VAC Coil, 30 A Maximum Load Current, 6 Pole, 50/60 Hz Frequency, 6NO-0NC Contact Configuration, 6 Auxiliary Contacts, Open Enclosure, -13 to 104 deg F Operating, 4.35 in H x 4.2 in W x 3.52 in D Dimensions
SPECIFICATIONS
Coil Voltage
:
110/115/120 VAC
Contact Configuration
:
6NO-0NC
Dimensions
:
4.35 in H x 4.2 in W x 3.52 in D
Enclosure Type
:
Open
Frequency Rating
:
50/60 Hz
Maximum Load Current
:
30 A
Number of Auxiliary Contacts
:
6
Number of Poles
:
6
Operating Temperature
:
-13 to 104 deg F
Series
:
C30
Type
:
2-Wire Type C30CN Mechanically Held
FEATURES
Power pole latch easily onto the base and designating them as NO-NC is a simple matter of left or right positioning, additional pole, either NO-NC, may be easily added at any time
Low magnetic noise results in quiet operation
Low input VA permits long wire runs
Come in a wide range of input voltages and with coils from 24 to 277 VAC and 12 VAC to 24 VDC
110 to 120 VAC mechanically held control module