LC1D32F7 Contactor replacement 32 Amp 40A, 50A 3 Pole 110V 120V, 1 NO 1 NC Aux.

Description

This listing is for a brand-new-in-the-box  IEC Contactor,
Three pole, 32 amps AC-3 full load / 50 amps AC-1 resistive per pole,
120 volt coil, one NC and one NO auxiliary contacts,
18.5 kW, rated for 20 HP @ 460 volts.
50 A Maximum Load Current,
Coil load:  70 VA Inrush, 7/7.5 VA Hold-In Coil,
3 Pole, 50/60 Hz Frequency, 15 kW Wattage,
Non-Reversing Contact,
3NO Contact Configuration,
1NO-1NC Auxiliary Contacts,
32 A at 600 VAC Contact,
Power Factor: 0.75 Inrush, 0.3 Hold-In,
Screw Clamp Connection, Screw Clamp Terminal,
IP2X Enclosure, 15000000 Cycles Operating Cycles,
-5 to 60 deg C Operating,
Surface Mounting, 45 mm W x 92 mm D x 85 mm
Additional Description:
LC1D32F7 CONTACTOR 600VAC 32AMP IEC
50 Amp. AC-1, 32 Amp. AC-3
3 Pole
Normally Open (N.O.) contacts 600V
50A. Incandescent, LED or resistive load
32A. Motor control, 20HP@ 480VAC
Auxiliary contact  1NO/1NC
Power Lug Terminal Capacity AWG # 4
Coil 110/120VAC