ELECTRODEPOT Contactor 40A 4 Pole Normally Closed IEC 400V, Silent Operation - 1

Description

BUNDLE CONTENT: 4 ITEMS - One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head screws (#10, 1/2") for immediate installation
APPLICATIONS - Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters; and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil
COIL VOLTAGE AND LOAD - Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz; Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4
OTHER CONTACTOR DETAILS - Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1; 10 kW, AC-3; 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height)
DIN RAIL - Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”)
ABOUT 40A CONTACTOR
ELECTRODEPOT - Contactor 934004 4 Pole Normally Closed 20A/40A, 120VAC Coil
Application Lighting, Motor or Switching 24/120/220/277 V Energy saving, Silent, No humming coil
Technical Specifications
Contactor IEC 400V
Contactor Type NC
Full Load Amps-Inductive 20
Full Load Amps-Resistive 40
DC Load: 30A, @ 24VDC
Power status indicator
Number of Poles 4
Coil Volts 110/120VAC, 50/60 Hz
Coil load; Inrush 30VA, Sealed 4VA
IEC AC Rate: AC-1; 10 kW, AC-3; 8 kW
Electric e strength: 4 kV
Operating Temperature -30…+70 °C (-22…+158 °F)
1 HP @ 1 Phase - 120V
2 HP @ 1 Phase - 230V
5 HP @ 3 Phase - 208V
5 HP @ 3 Phase - 230V
10HP @ 3 Phase - 480V
Weight: 0.88 lb (0.42 kg)
CE approved 61095, UL pending
Base or DIN 35mm mount
Wiring
Solid Conductor: 25 mm2 Max torque 0.6 Nm Stranding Conductor: 16 mm2, Max torque 0.6 Nm
ABOUT DIN RAIL
DIN Rails are the standard mounting support for any electromechanical component, device or equipment designed using the DIN specifications adopted by European (EN) and international (IEC) standards.
The rail features conveniently placed slots throughout its length making it easy to attach to a panel, wall or equipment. Used for support of mini circuit breakers, contactors, auxiliary relays, terminal blocks, low voltage apparatuses, etc.
Standard width 35mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”).
ABOUT SCREWS
Drive stainless steel truss head screws (#10, 1/2"") for immediate installation.