ELECTRODEPOT Contactor 40A 4 Pole 2NO 2NC IEC 400V, Silent Operation - 110/120VA

Description

INDUSTRIAL QUALITY COMPONENTS - 40Amp General Purpose Contactor for home and industrial uses, compatible with 35mm DIN rails, with power status indicator. Complies with IEC/EN standards for consistent and reliable installation. Additionally, 2 Normally Open (NO) and 2 Normally Closed (NC) poles for transfer switch applications
APPLICATIONS - Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters; and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil
FULL AMP LOAD - Works for 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Inductive/Motor Load: 40Amp. Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Power Lug Terminal Capacity AWG # 4
COIL VOLTAGE AND LOAD - Voltage: AC 110V/120V, 50/60Hz. Load: 52 VA Inrush and 10VA Sealed
DIMENSIONS (approx.) - 54 x 85 x 67 mm / 2.2'' x 3.3'' x 2.5'' (Width x Height x Depth)
40 Amp 4 Pole, 2 Normally Open and 2 Normally Closed, IEC 400V Contactor for home or industrial uses. Perfectly compatible with DIN rail mounting. Works for 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. It features a convenient power status indicator, and an energy saving, silent and no humming coil. With applications in lighting, motor and switching.
Technical Specifications
Contactor IEC 400V
Contactor Type 2NO 2NC
Full Load Amps-Inductive 40
Full Load Amps-Resistive 63
DC Load: 30A, @ 24VDC
Power status indicator
Number of Poles 4
Coil Volts: 110/120VAC, 50/60 Hz
Coil Load: Inrush 52VA, Sealed 10VA
IEC AC Rate: AC-1, 10 kW. AC-3, 8 kW
Electric e strength: 4 kV
Operating Temperature: -30…+70 °C (-22…+158 °F)
1 HP @ 1 Phase - 120V
2 HP @ 1 Phase - 230V
5 HP @ 3 Phase - 208V
5 HP @ 3 Phase - 230V
10HP @ 3 Phase - 480V
Weight: 0.88 lb (0.42 kg)
CE approved 61095, UL pending
Base or DIN 35mm mount
Wiring
Solid Conductor: 25 mm2 Max torque 0.6 Nm Stranding Conductor: 16 mm2, Max torque 0.6 Nm
Compliance
EN 60947-4-1, EN 60947-5-1, IEC 947-2, IEC 60947-4-1, IEC 60947-5-1, VDE 0660